DISASSEMBLY
Removal / installation · Vehicles built from Aug 2013
| 1.
REMOVE FRONT SUSPENSION UPPER ARM BUSH LH |
 |
- HINT:
- Use the same procedure for the front and rear sides.
- Using a hammer and chisel, strike and bend the entire flange of the upper arm bush as shown in the illustration.
- Using SST and a press, press out the bush.
- SST
- 09613-26010
09710-22021
(09710-01031)
09950-00020
| 2.
REMOVE FRONT UPPER BALL JOINT DUST COVER LH |
 |
- Using a snap ring expander, remove the dust cover set ring and dust cover from the upper arm.
- NOTICE:
- Do not damage the ball joint dust cover.
- If the ball joint dust cover is damaged, replace it.