DISASSEMBLY
Removal / installation · Vehicles built from Aug 2013
| 1.
REMOVE FRONT NO. 1 LOWER ARM BUSH LH |
 |
- Using a chisel and hammer, pry the flange of the bush outward.
- Using SST and a press, press out the bush.
- SST
- 09632-36010
09950-00020
09950-60010
(09951-00400)
| 2.
REMOVE FRONT NO. 2 LOWER ARM BUSH LH |
 |
- Using a chisel and hammer, pry the flange of the bush outward.
- Using SST and a press, press out the bush.
- SST
- 09632-36010
09950-00020
09950-60010
(09951-00400)
| 3.
REMOVE LOWER BALL JOINT DUST COVER LH |
 |
- Using a snap ring expander, remove the dust cover set ring and dust cover from the lower arm.
- NOTICE:
- Do not damage the ball joint dust cover.
- If the ball joint dust cover is damaged, replace it.