REASSEMBLY
Removal / installation · Vehicles built from Aug 2013
| 1.
INSTALL LOWER BALL JOINT DUST COVER LH |
 |
Pack the upper arm ball joint with MP grease.
- Grease capacity:
- 8.0 g (0.282 oz.)
- Apply MP grease to the locations shown in the illustration.
Text in Illustration
*1
|
MP Grease
|
- NOTICE:
- Do not apply MP grease to the tapered or threaded parts of the ball joint.
Install the dust cover to the lower arm.
- Using a snap ring expander, install the dust cover set ring.
- NOTICE:
- Make sure the set ring is securely installed in the groove.
| 2.
INSTALL FRONT NO. 2 LOWER ARM BUSH LH |
 |
- Using SST and a press, press in a new bush.
- SST
- 09387-00020
09710-30041
(09710-03221)
Text in Illustration
*a
|
Bush Positioning Protrusion
|
- NOTICE:
- Press in the bush while making sure the bush positioning protrusions are perpendicular to the lower arm as shown in the illustration.
| 3.
INSTALL FRONT NO. 1 LOWER ARM BUSH LH |
 |
- Using SST and a press, press in a new bush.
- SST
- 09612-30012
09710-30012
(09710-04081)