2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE AIR CLEANER AND HOSE

  1. A223920
    Detach the 3 clamps and disconnect the mass air flow meter connector.

  1. A223921
    Detach the 4 clamps.

  1. Loosen the hose clamp and remove the air cleaner and hose.


2. REMOVE INTAKE AIR CONNECTOR

  1. A273728
    w/ Manifold absolute pressure sensor:

    1. Disconnect the air pressure sensor connector.

    2. Detach the 2 clamps.

    3. Disconnect the vacuum hose.

  1. A224325
    Disconnect the No. 2 ventilation hose.

  1. Detach the wire harness clamp.

  1. G037696E01
    Disconnect the vacuum hose.

  1. A224324
    Loosen the hose clamp.

  1. Remove the 3 bolts and intake air connector.


3. REMOVE IGNITION COIL ASSEMBLY

  1. A222689
    Disconnect the 4 ignition coil connectors.

  1. A222690
    Remove the 4 bolts and 4 ignition coils.


4. REMOVE SPARK PLUG

  1. A222691
    Using a 16 mm spark plug wrench, remove the 4 spark plugs.

← COMPONENTS (from Aug 2013)INSTALLATION (from Aug 2013) →