INSTALLATION
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR |
Install the manifold absolute pressure sensor with the bolt.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
Connect the vacuum hose and manifold absolute pressure sensor connector.
| 2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY |
Attach the 2 No. 1 engine cover hooks to the No. 3 engine cover bracket.

Text in Illustration *1
No. 1 Engine Cover Hook
*2
No. 3 Engine Cover Bracket
Install the 2 nuts.
- Torque:
- 12 N*m{ 122 kgf*cm , 9 ft.*lbf }
