REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY |
Remove the 2 nuts.

Text in Illustration *1
No. 1 Engine Cover Hook
*2
No. 3 Engine Cover Bracket
Detach the 2 No. 1 engine cover hooks from the No. 3 engine cover bracket and remove the No. 1 engine cover.
| 2. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR |
Disconnect the manifold absolute pressure sensor connector and vacuum hose.

Remove the bolt and manifold absolute pressure sensor.
