2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSTALLATION

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. INSTALL INJECTOR DRIVER BRACKET
  1. Install the injector driver bracket with the 3 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }


2. INSTALL INJECTOR DRIVER ASSEMBLY (w/o DPF)

  1. A220753E01
    Install the injector driver assembly with the 3 bolts.

    Torque:
    for bolt A:
    13 N*m{ 127 kgf*cm , 9 ft.*lbf }
    for bolt B:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the 3 connectors.


3. INSTALL INJECTOR DRIVER ASSEMBLY (w/ DPF)
  1. Install the injector driver assembly with the 2 bolts.

    Torque:
    13 N*m{ 127 kgf*cm , 9 ft.*lbf }

  1. Connect the 4 connectors.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Aug 2013 – Jul 2014)COMPONENTS (from Aug 2013) →