2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE INJECTOR DRIVER ASSEMBLY (w/o DPF)

  1. A220753
    Disconnect the 3 connectors.

  1. Remove the 3 bolts and injector driver assembly.


3. REMOVE INJECTOR DRIVER ASSEMBLY (w/ DPF)

  1. A239612
    Disconnect the 4 connectors.

  1. Remove the 2 bolts and injector driver assembly.


4. REMOVE INJECTOR DRIVER BRACKET

  1. A239613E01
    Remove the 3 screws and injector driver bracket.
    Text in Illustration 
    *A
    w/o DPF
    *B
    w/ DPF

← REMOVAL (Aug 2013 – Jul 2014)INSTALLATION (Aug 2013 – Jul 2014) →