INSTALLATION
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL FUEL SENDER GAUGE ASSEMBLY (for 5 Door) |
Set the fuel sender gauge on the fuel sub-tank. Then slide the fuel sender gauge downward to install it.

Text in Illustration *1
Fuel Sub-Tank


Slide
Connect the fuel sender gauge connector.
| 2. INSTALL FUEL SENDER GAUGE ASSEMBLY (for 3 Door) |
Install a new gasket and the fuel sender gauge with the 5 screws.
- Torque:
- 1.5 N*m{ 15 kgf*cm , 13 in.*lbf }
Connect the fuel sender gauge connector and fuel tank ground connector.
| 3. INSTALL FUEL TANK VENT TUBE ASSEMBLY (for 5 Door) |
Install the fuel tank vent tube assembly (Click here).
| 4. INSTALL REAR FLOOR SERVICE HOLE COVER (for 3 Door) |
Install the rear floor service hole cover with the 3 screws.
| 5. INSTALL REAR FLOOR MAT SUPPORT PLATE (for 3 Door) |
Attach the 6 claws to install the rear floor mat rear support plate.
Install the 5 screws.
