2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for LHD and RHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE NO. 2 FOLD SEAT SWITCH ASSEMBLY

  1. B236559E01
    Put protective tape around the No. 2 fold seat switch assembly.
    Text in Illustration 
    *1
    Protective Tape

  1. Using a moulding remover, detach the 2 claws.

  1. B236560
    Disconnect the connector and remove the fold seat switch.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →