C1883/83 Speed Sensor Circuit Malfunction
Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
The stabilizer control ECU receives the speed signal from the skid control ECU via CAN communication.| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1883/83 |
The stabilizer control ECU continuously receives a speed sensor malfunction signal from the skid control ECU for 1 second. |
|
INSPECTION PROCEDURE
- HINT:
- If DTC U0122/71 and C1883/83 are output at the same time, perform the inspection necessary for the CAN communication system first (Click here).
| 1. CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM) |
Check for speed sensor malfunction DTCs (Click here).
Result Result
Proceed to
DTC is not output
A
DTC is output
B
|
|
||||
| A | |
| 2. RECONFIRM DTC |
Clear the DTCs (Click here).
Perform a road test.
Check for DTCs (Click here).
Result Result
Proceed to
DTC is not output
A
DTC is output
B
|
|
||||
| A | ||
| ||
