DISASSEMBLY
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- NOTICE:
- Do not disconnect the hoses indicated in the illustration.
| 1.
REMOVE FUEL SENDER GAUGE ASSEMBLY
|
 |
- Disconnect the fuel sender gauge connector.
- Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge upward to remove it.
Text in Illustration
 
|
Press down
|
 
|
Slide
|
| 2.
REMOVE NO. 1 FUEL SUB-TANK |
 |
- Disconnect the fuel pump connector.
- Disconnect the jet pump labeled A from the No. 1 fuel sub-tank.
Text in Illustration
*1
|
Jet Pump A
|
*2
|
Jet Pump B
|
Disconnect the jet pump labeled B from the No. 1 fuel sub-tank.
Using a small screwdriver, detach the claw from the No. 1 fuel sub-tank.
- HINT:
- Tape the screwdriver tip before use.
- NOTICE:
- Do not damage the No. 1 fuel sub-tank.
- Using a screwdriver, detach the 3 claws from the claw holes.
- HINT:
- Tape the screwdriver tip before use.
- NOTICE:
- Do not damage the No. 1 fuel sub-tank.
- Using a screwdriver, detach the 3 claws from the claw holes.
- HINT:
- Tape the screwdriver tip before use.
- NOTICE:
- Do not damage the No. 1 fuel sub-tank.
| 3.
REMOVE FUEL PUMP |
 |
- Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.
Text in Illustration
*1
|
Fuel Filter Case
|
- HINT:
- Tape the screwdriver tip before use.
Disconnect the fuel pump wire harness connector from the fuel pump to remove it.
- Remove the O-ring and fuel pump spacer from the fuel pump.
Text in Illustration
*1
|
O-Ring
|
*2
|
Fuel Pump Spacer
|
| 4.
REMOVE FUEL MAIN VALVE ASSEMBLY |
 |
- Remove the fuel main valve from the fuel filter case.
Text in Illustration
*1
|
Fuel Filter Case
|
*2
|
O-Ring
|
Remove the 2 O-rings from the fuel main valve.