2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


NOTICE:
A223124
Do not disconnect the hoses indicated in the illustration.


1. REMOVE FUEL SENDER GAUGE ASSEMBLY

  1. A228320
    Disconnect the fuel sender gauge connector.

  1. A331218E01
    Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge assembly upward to remove it.
    Text in Illustration 
    V100135
    Press down
    V100136
    Slide


2. REMOVE NO. 1 FUEL SUB-TANK

  1. A223174
    Disconnect the fuel pump connector.

  1. A223175E01
    Disconnect the jet pump labeled A from the No. 1 fuel sub-tank.
    Text in Illustration 
    *1
    Jet Pump A
    *2
    Jet Pump B

  1. Disconnect the jet pump labeled B from the No. 1 fuel sub-tank.

    1. Using a small screwdriver, detach the claw from the No. 1 fuel sub-tank.

      HINT:
      Tape the screwdriver tip before use.

      NOTICE:
      Do not damage the No. 1 fuel sub-tank.

  1. A223176
    Using a screwdriver, detach the 3 claws from the claw holes.

    HINT:
    Tape the screwdriver tip before use.

    NOTICE:
    Do not damage the No. 1 fuel sub-tank.

  1. A175041
    Using a screwdriver, detach the 3 claws from the claw holes.

    HINT:
    Tape the screwdriver tip before use.

    NOTICE:
    Do not damage the No. 1 fuel sub-tank.


3. REMOVE FUEL PUMP

  1. A223259E01
    Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.
    Text in Illustration 
    *1
    Fuel Filter Case

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect the fuel pump wire harness connector from the fuel pump to remove it.

  1. A223258E01
    Remove the O-ring and fuel pump spacer from the fuel pump.
    Text in Illustration 
    *1
    O-Ring
    *2
    Fuel Pump Spacer


4. REMOVE FUEL MAIN VALVE ASSEMBLY

  1. A223257E01
    Remove the fuel main valve from the fuel filter case.
    Text in Illustration 
    *1
    Fuel Filter Case
    *2
    O-Ring

  1. Remove the 2 O-rings from the fuel main valve.

← DISASSEMBLY (Aug 2013 – Jul 2014)INSPECTION (from Aug 2013) →