INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL LUMBAR SWITCH ASSEMBLY |
Install the switch with the 2 screws.
| 2. INSTALL FRONT SEAT CUSHION SHIELD LH |
for Driver Side:
Attach the 5 wire harness clamps and connect the 2 connectors.
Attach the 4 claws and clip to install the cushion shield.

Install the screw.
| 3. INSTALL VERTICAL ADJUSTING HANDLE LH |
Install the handle with the screw.
| 4. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH |
![]() ![]() |
Attach the claw to install the handle.
| 5. INSTALL FRONT SEAT ASSEMBLY |
Install the front seat assembly (Click here).

