REMOVAL
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1.
REMOVE FRONT SEAT ASSEMBLY |
 |
Remove the front seat assembly (Click here).
| 2.
REMOVE SEPARATE TYPE FRONT SEATBACK COVER |
 |
- Remove the rubber band from the seat cushion spring.
- Disconnect the seat heater connector and detach the wire harness clamp.
- Remove the 3 hog rings.
Open the 2 fasteners, and then open the seatback cover.


Text in Illustration
*A
|
for Cloth Seat
|
*B
|
for Leather Seat
|
- w/ Front Seat Side Airbag:
Remove the nut and seatback cover bracket from the seat frame.
Disconnect the seatback cover bracket from the seatback pad.
- Using a screwdriver, detach the 4 claws and remove the 2 headrest supports.
Remove the hog rings and front seatback cover.
- HINT:
- The number of hog rings differs according to seat type.


Text in Illustration
*A
|
for Type A
|
*B
|
for Type B
|
| 3.
REMOVE FRONT SEATBACK HEATER ASSEMBLY LH |
 |
Cut off the tack pins which fasten the seatback heater to the seatback cover, and then remove the seatback heater from the seatback cover.
Text in Illustration
*1
|
Tack Pin
|