2.
REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
Using a moulding remover, detach the 2 claws and remove the slide and vertical power seat switch knob.
3.
REMOVE RECLINING POWER SEAT SWITCH KNOB
Using a moulding remover, detach the 2 claws and remove the reclining power seat switch knob.
4.
REMOVE FRONT SEAT CUSHION SHIELD LH
Disconnect the lifter motor connector.
Remove the screw of the front seat No. 1 inner cushion shield LH and detach the guide.
Detach the clip of the front seat No. 1 inner cushion shield LH.
Using a moulding remover, detach the 3 claws and guide.
Move the front seat cushion shield LH in the direction of the arrow to detach the clip and remove the front seat No. 1 inner cushion shield LH together with the front seat cushion shield LH as a unit.
Detach the 3 claws and open the wire harness cover.
Detach the 3 wire harness clamps and disconnect the seat wire connector.
5.
REMOVE FRONT POWER SEAT SWITCH LH
Remove the 3 screws.
w/ Seat Memory System: Disconnect the 2 power seat switch connectors and remove the front power seat switch LH.
w/o Seat Memory System: Disconnect the power seat switch connector and remove the front power seat switch LH.