REMOVAL
Removal / installation · Vehicles built from Aug 2013
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE REAR SEAT ASSEMBLY RH |
Remove the rear seat assembly RH (Click here).
| 2. REMOVE REAR SEAT CUSHION MOULDING RH |
![]() ![]() |
Remove the screw.
Using a moulding remover, detach the 3 claws.
Detach the 2 guides and remove the rear seat rear cushion moulding LH.
| 3. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH |
![]() ![]() |
Remove the bolt and inner belt.



