2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.


1. REMOVE REAR SEAT CUSHION HINGE COVER LH

B238036
  1. Using a moulding remover, detach the 3 claws and remove the cover.


2. REMOVE REAR SEAT CUSHION HINGE COVER RH

B238037
  1. Using a moulding remover, detach the 3 claws and remove the cover.


3. REMOVE REAR SEAT CUSHION ASSEMBLY RH

B238038
  1. Pull the rear seat cushion band and release the lock.

  1. Remove the 2 bolts and seat cushion.

    NOTICE:
    Be careful not to damage the vehicle body.


4. REMOVE REAR SEAT HEADREST ASSEMBLY
  1. Remove the headrest.


5. REMOVE REAR SEATBACK COVER
  1. Press the seatback lock release button to release the lock and fold down the seatback.

  1. B237641
    Using a screwdriver, detach the 4 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


6. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH

B238017
  1. Using a clip remover, detach the 5 clips.

  1. Detach the 2 claws and remove the carpet.


7. REMOVE REAR SEATBACK ASSEMBLY RH

B238088
  1. Remove the bolt and detach the 2 claws, and then disconnect the outer belt.

  1. Remove the 2 bolts that secure the seatback to the floor.

  1. Fold down the seatback, remove the bolt from the hinge, and then remove the seatback.

    NOTICE:
    Be careful not to damage the vehicle body.


8. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH

B238018
  1. Remove the bolt and hinge.


9. REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE RH

B238019
  1. Using a moulding remover, detach the 6 claws.

  1. Move the cover in the direction of the arrow to detach the 2 guides and remove the lever base.

  1. B238021
    Detach the cable clamp and disconnect the cable.


10. REMOVE REAR NO. 2 SEAT ASSEMBLY RH
  1. for Face to Face Seat Type:
    Remove the rear No. 2 seat assembly (Click here).


11. REMOVE REAR DOOR SCUFF PLATE RH

HINT:
Use the same procedure described for the LH side.


12. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:
Use the same procedure described for the LH side.


13. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
  1. Remove the tonneau cover.


14. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

B240044

HINT:
Use the same procedure for the other front luggage compartment trim cover.

  1. Detach the 4 claws and remove the cap.

  1. B238749E01
    Remove the bolt, luggage hold belt striker and front luggage compartment trim cover.
    Text in Illustration 
    *1
    Luggage Hold Belt Striker


15. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY

B238750
  1. Detach the clip and remove the No. 1 deck board.


16. REMOVE REAR FLOOR REAR MAT SUPPORT PLATE

B238748
  1. Detach the 5 clips and 4 claws and remove the rear floor mat rear support plate.


17. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

B238764
  1. Remove the 3 bolts and floor side rail.


18. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

HINT:
Use the same procedure described for the LH side.


19. REMOVE REAR FLOOR CARPET ASSEMBLY

  1. Detach the 4 claws and remove the rear floor carpet.

    B238751E01

    Text in Illustration 
    *A
    w/o Deck Rail
    *B
    w/ Deck Rail
    *C
    for Face to Face Seat Type
    -
    -


20. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

B238752

HINT:
Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.

  1. Detach the 3 claws and remove the rear No. 1 seat outer lap belt anchor cover.


21. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

B181695

HINT:
Use the same procedure for the other No. 1 luggage compartment trim hook.

  1. Remove the luggage compartment trim hook by turning it clockwise.


22. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

B238754E01

HINT:
Use the same procedure for the other No. 1 tonneau cover holder cap.

  1. Using a screwdriver, detach the 2 claws and remove the No. 1 tonneau cover holder cap.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape


23. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

B240051E01

HINT:
Use the same procedure for the other front deck side trim cover.

  1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape


24. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

  1. w/o Rear No. 2 Seat:

    1. B238821
      Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

    2. B238823
      Detach the 6 claws and 2 guides and disconnect the rear seatback lock control lever base.

    3. Remove the 4 bolts and screws.

    4. Detach the 5 clips and 8 claws.

    5. Disconnect each connector.

    6. Pass the rear seatback lock control lever base through the deck trim side panel and remove the deck trim side panel.

      B238822

  1. w/ Rear No. 2 Seat:

    1. B238821
      Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

    2. B238826
      Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

    3. Remove the 2 bolts and screw.

    4. Detach the 4 clips and 8 claws.

    5. Disconnect each connector and remove the deck trim side panel.

      B238827


25. REMOVE REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY RH

B238022
  1. Remove the 2 bolts.

  1. Detach the claw and remove the striker.

    NOTICE:
    Do not wipe off the grease on the sliding portion of the striker.


26. REMOVE REAR SEAT CUSHION LOCK STRIKER

B238023
  1. Remove the 2 bolts and striker.

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2014) →