REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY |
![]() ![]() |
Detach the 4 clips.
Disconnect each connector and remove the instrument panel finish panel.
| 2. REMOVE BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY |
![]() ![]() |
Detach the 2 claws and remove the back sonar or clearance sonar switch.



