2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REASSEMBLY

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE SECURITY INDICATOR LIGHT ASSEMBLY
  1. Attach the 2 claws to install the security indicator light.

  1. Connect the connector.


2. REMOVE SUNSHINE SENSOR HOLE COVER (w/o Automatic Light Control System)
  1. Attach the 2 claws to install the sunshine sensor hole cover.


3. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)

  1. B152661
    Attach the 2 claws to install the sensor.

  1. Connect the connector.


4. INSTALL ENGINE SWITCH (w/ Entry and Start System)
  1. Attach the 2 claws to install the engine switch.

  1. Connect the connector.


5. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

  1. B238340E01
    Attach the 5 hooks (A).
    Text in Illustration 
    *a
    Hook A
    *b
    Hook B

  1. Attach the 5 hooks (B) to install the instrument panel passenger airbag.

  1. Install the 2 screws.


6. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

  1. B239305
    Install the navigation antenna assembly with the 2 screws.

  1. Attach the 2 clamps.


7. INSTALL NO. 2 INSTRUMENT PANEL WIRE
  1. for LHD:

    1. Attach the 20 clamps to install the No. 2 instrument panel wire.

    2. Connect the 2 connectors.

  1. for RHD:

    1. Attach the 20 clamps to install the No. 2 instrument panel wire.

    2. Connect the 2 connectors.


8. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH
  1. Install the No. 1 defroster nozzle garnish with the 6 screws <A>.


9. INSTALL NO. 3 HEATER TO REGISTER DUCT
  1. Install the No. 3 heater to register duct with the 2 screws <A>.


10. INSTALL DEFROSTER NOZZLE ASSEMBLY
  1. Install the defroster nozzle with the 4 screws <A>.


11. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
  1. Attach the 2 claws to install the No. 1 side defroster nozzle duct.

  1. Install the screw <A>.


12. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

HINT:
Use the same procedure described for the No. 1 side defroster nozzle duct.


13. INSTALL NO. 1 HEATER TO REGISTER DUCT
  1. Install the No. 1 heater to register duct with the 4 screws <A>.


14. INSTALL NO. 2 HEATER TO REGISTER DUCT

HINT:
Use the same procedure described for the No. 1 heater to register duct.

← REASSEMBLY (Aug 2013 – Jul 2014)INSTALLATION (Aug 2013 – Jul 2014) →