REASSEMBLY
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE SECURITY INDICATOR LIGHT ASSEMBLY |
Attach the 2 claws to install the security indicator light.
Connect the connector.
| 2. REMOVE SUNSHINE SENSOR HOLE COVER (w/o Automatic Light Control System) |
Attach the 2 claws to install the sunshine sensor hole cover.
| 3. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System) |
Attach the 2 claws to install the sensor.

Connect the connector.
| 4. INSTALL ENGINE SWITCH (w/ Entry and Start System) |
Attach the 2 claws to install the engine switch.
Connect the connector.
| 5. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY |
Attach the 5 hooks (A).

Text in Illustration *a
Hook A
*b
Hook B
Attach the 5 hooks (B) to install the instrument panel passenger airbag.
Install the 2 screws.
| 6. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) |
Install the navigation antenna assembly with the 2 screws.

Attach the 2 clamps.
| 7. INSTALL NO. 2 INSTRUMENT PANEL WIRE |
for LHD:
Attach the 20 clamps to install the No. 2 instrument panel wire.
Connect the 2 connectors.
for RHD:
Attach the 20 clamps to install the No. 2 instrument panel wire.
Connect the 2 connectors.
| 8. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH |
Install the No. 1 defroster nozzle garnish with the 6 screws <A>.
| 9. INSTALL NO. 3 HEATER TO REGISTER DUCT |
Install the No. 3 heater to register duct with the 2 screws <A>.
| 10. INSTALL DEFROSTER NOZZLE ASSEMBLY |
Install the defroster nozzle with the 4 screws <A>.
| 11. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT |
Attach the 2 claws to install the No. 1 side defroster nozzle duct.
Install the screw <A>.
| 12. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT |
- HINT:
- Use the same procedure described for the No. 1 side defroster nozzle duct.
| 13. INSTALL NO. 1 HEATER TO REGISTER DUCT |
Install the No. 1 heater to register duct with the 4 screws <A>.
| 14. INSTALL NO. 2 HEATER TO REGISTER DUCT |
- HINT:
- Use the same procedure described for the No. 1 heater to register duct.
