2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. INSTALL NO. 1 COOLER BLOWER MOTOR SUB-ASSEMBLY
  1. Attach the 3 claws to install the No. 1 cooler blower motor sub-assembly.


2. INSTALL NO. 1 COOLER BLOWER FAN
  1. Align the fan motor splines and install the No. 1 cooler blower fan.

    NOTICE:
    Be careful not to damage the fan splines.

  1. Attach the 4 claws to install the blower fan cover.


3. INSTALL NO. 2 COOLER EVAPORATOR SUB-ASSEMBLY
  1. Tighten the 2 nuts and install the liquid tube, cooler magnet valve and No. 2 cooler evaporator sub-assembly.

    Torque:
    13.3 N*m{ 136 kgf*cm , 10 ft.*lbf }

  1. Attach the 2 claws.

  1. E201158
    Install the cooler evaporator assembly.

  1. E201157
    Install the cooling unit case.

  1. Install the 4 bolts.

  1. Install the 5 holding springs.

  1. Install the air duct with the 3 screws and 5 bolts.


4. INSTALL COOLING UNIT DOOR
  1. Install the cooling unit door with the 8 screws and 2 bolts.

  1. Install new packing.


5. INSTALL COOLER CONTROL SWITCH SUB-ASSEMBLY
  1. Attach the 2 claws to install the cooler control switch sub-assembly.


6. INSTALL NO. 1 COOLER WIRING HARNESS SUB-ASSEMBLY
  1. Connect the 3 connectors and install the No. 1 cooler wiring harness sub-assembly.

  1. Install new packing.


7. INSTALL NO. 3 COOLER UNIT DRAIN HOSE

  1. E197120
    Install the No. 3 cooler unit drain hose.


8. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
  1. Install the air conditioning amplifier assembly with the 2 screws.

  1. Connect the connector.


9. INSTALL COOLING BOX ASSEMBLY
  1. Attach the 12 claws to install the cooling box assembly.

  1. Install the 6 screws.


10. INSTALL CONSOLE BOX REGISTER ASSEMBLY
  1. Attach the 4 claws to install the console box register.


11. INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
  1. Install the console compartment door hinge sub-assembly with the 4 screws.

  1. Attach the 5 claws.

  1. Install the 6 screws.


12. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
  1. Install the console compartment door sub-assembly with the 6 screws.

← DISASSEMBLY (from Aug 2013)INSTALLATION (Aug 2013 – Jul 2014) →