2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. A bolt without a torque specification is shown in the standard bolt chart (Click here).


1. INSTALL REAR CONSOLE BOX ASSEMBLY
  1. Connect each connector.

  1. Install the rear console box with the 2 screws, clip and 5 bolts.


2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY
  1. Connect each connector.

  1. Attach the 4 clips and 4 claws to install the rear console end panel.


3. INSTALL NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)
  1. Install the No. 1 console box duct with the clip.


4. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (w/ Cool Box)
  1. Attach the 4 claws to install the No. 1 heater to register duct.

  1. Attach the 2 clamps.


5. INSTALL CONSOLE PANEL SUB-ASSEMBLY
  1. Connect each connector.

  1. Attach the 8 clips and 2 claws to install the console panel.


6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

B363431
  1. Install the shift lever knob and twist it in the direction indicated by the arrow.


7. INSTALL FRONT NO. 2 CONSOLE BOX INSERT
  1. Attach the 2 clips and guide to install the front No. 2 console box insert.


8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. Attach the 3 clips and 2 guides to install the No. 2 instrument panel under cover.

  1. Install the screw.

    B298555E01

    Text in Illustration 
    *A
    for LHD
    *B
    for RHD


9. INSTALL FRONT NO. 1 CONSOLE BOX INSERT
  1. Attach the 2 clips and guide to install the front No. 1 console box insert.


10. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. for LHD:

    1. Attach the 2 clips and 2 guides to install the No. 1 instrument panel under cover.

    2. Install the screw.

  1. for RHD:

    1. Attach the 3 clips and 2 guides to install the No. 1 instrument panel under cover.

    2. Install the screw.


11. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
  1. w/o Seat Heater System:

    1. Connect the connector.

    2. Attach the 5 clips to install the front console upper panel garnish.

  1. w/ Seat Heater System, w/ Climate Control Seat System:

    1. Connect each connector.

    2. Attach the 5 clips to install the front console upper panel garnish.


12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
  1. Attach the 5 clips to install the No. 2 instrument panel finish panel cushion.


13. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
  1. Attach the 4 clips to install the instrument panel finish panel end LH.


14. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

HINT:
Use the same procedure described for the No. 2 instrument panel finish panel cushion.


15. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
  1. Attach the 4 clips to install the instrument panel finish panel end RH.


16. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
  1. Connect the connector.

  1. Attach the 4 clips to install the integration control and panel assembly.

← REASSEMBLY (from Aug 2013)COMPONENTS (from Aug 2013) →