REASSEMBLY
Removal / installation · Vehicles built from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
Attach the 6 claws to install the parking brake hole cover.
| 2. INSTALL UPPER CONSOLE PANEL |
Attach the 4 claws and clip to install the upper console panel.
Install the 7 screws.
| 3. INSTALL SHIFTING HOLE BEZEL |
Attach the 8 claws to install the shifting hole bezel.
| 4. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY |
Attach the 7 claws to install the shifting hole cover.
| 5. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY |
Install the instrument panel cup holder with the 4 screws.
| 6. INSTALL CONSOLE BOX REGISTER ASSEMBLY |
Attach the 4 claws to install the console box register.
| 7. INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY |
Install the console compartment door hinge with the 4 screws.
Install the cover with the 8 screws.
Install the cover.
Install the 4 screws.
| 8. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY |
Install the console compartment door with the 6 screws.
