DISASSEMBLY
Removal / installation · Vehicles built from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY |
![]() ![]() |
Remove the 6 screws and console compartment door.
| 2. REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY |
![]() ![]() |
Remove the 4 screws.
Remove the cover.

Remove the 8 screws and cover.

Remove the 4 screws and console compartment door hinge.

| 3. REMOVE CONSOLE BOX REGISTER ASSEMBLY |
![]() ![]() |
Detach the 4 claws and remove the console box register.
| 4. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY |
![]() ![]() |
Remove the 4 screws and instrument panel cup holder.
| 5. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY |
![]() ![]() |
Detach the 7 claws and remove the shifting hole cover.
| 6. REMOVE SHIFTING HOLE BEZEL |
![]() ![]() |
Detach the 8 claws and remove the shifting hole bezel.
| 7. REMOVE UPPER CONSOLE PANEL |
![]() ![]() |
Remove the 7 screws.
Detach the 4 claws and clip and remove the upper console panel.
| 8. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
![]() ![]() |
Detach the 6 claws and remove the parking brake hole cover.








