DISASSEMBLY
Removal / installation · Vehicles built from Aug 2013
| 1.
REMOVE NO. 2 SYNCHRONIZER RING |
 |
Remove the synchronizer ring from the input shaft.
| 2.
REMOVE INPUT SHAFT BEARING |
 |
Remove the bearing from the input shaft.
| 3.
REMOVE FRONT BEARING SHAFT SNAP RING |
 |
- Using a snap ring expander, remove the snap ring from the input shaft.
| 4.
REMOVE INPUT SHAFT FRONT BEARING |
 |
- Using SST and a press, remove the front bearing from the input shaft.
- SST
- 09950-00020