2013-2015 Land Cruiser Prado · Service Manual Drivetrain

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT COUNTER GEAR

  1. C086509E01
    Using a micrometer, measure the diameter of the counter gear as shown in the illustration.

    Standard diameter:
    29.984 to 30.000 mm (1.1805 to 1.1811 in.)

    Minimum diameter:
    29.984 mm (1.1805 in.)

    1. If the diameter is less than the minimum, replace the counter gear with a new one.

← DISASSEMBLY (from Aug 2013)REASSEMBLY (from Aug 2013) →