REASSEMBLY
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL COUNTER GEAR FRONT BEARING |
Using SST and a press, install the front bearing to the counter gear.

- SST
- 09515-10010
- NOTICE:
- Install the front bearing so that the snap ring groove of the bearing faces the front side.
| 2. INSTALL NO. 2 COUNTER GEAR FRONT BEARING SNAP RING |
Select a snap ring that makes the clearance between the counter gear and snap ring to be within the specification.
- Standard clearance:
- 0.10 mm (0.00394 in.) or less
- Snap Ring Thickness:
Thickness
2.10 mm (0.0827 in.)
2.15 mm (0.0846 in.)
2.20 mm (0.0866 in.)
2.25 mm (0.0886 in.)
2.30 mm (0.0906 in.)
2.35 mm (0.0925 in.)
Using a snap ring expander, install the snap ring.

