REMOVAL
Removal / installation · Vehicles built from Aug 2013
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
| 1.
REMOVE REAR SEAT HEADREST ASSEMBLY |
 |
Remove the headrest.
| 2.
REMOVE REAR SEAT CENTER HEADREST ASSEMBLY |
 |
Remove the headrest.
| 3.
REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER |
 |
Using a moulding remover, detach the 6 claws.
Detach the 2 guides and remove the cover.
| 4.
REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER |
 |
Using a moulding remover, detach the 6 claws.
Detach the 2 guides and remove the cover.
| 5.
REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER |
 |
- Operate the reclining release handle to move the seat into the position shown in the illustration.
- Using a moulding remover, detach the claw and remove the cover.
| 6.
REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER |
 |
- Using a moulding remover, detach the claw and remove the cover.
| 7.
REMOVE REAR NO. 1 SEAT ASSEMBLY LH |
 |
Remove the 3 bolts, nut and seat.
- NOTICE:
- Be careful not to damage the vehicle body.