2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

B240279E01
  1. Place the seat in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Temporarily install the seat with the 3 bolts and nut.

  1. Tighten the bolts and nut in the order indicated in the illustration.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }


2. INSTALL REAR NO. 3 SEAT CUSHION HINGE COVER
  1. Attach the claw to install the cover.


3. INSTALL REAR NO. 4 SEAT CUSHION HINGE COVER
  1. Attach the claw to install the cover.


4. INSTALL REAR NO. 1 SEAT CUSHION HINGE COVER
  1. Return the seat to the upright position.

  1. B241075
    Move the cover in the direction of the arrow to attach the 2 guides.

  1. Attach the 6 claws to install the cover.


5. INSTALL REAR NO. 2 SEAT CUSHION HINGE COVER

B241073
  1. Move the cover in the direction of the arrow to attach the 2 guides.

  1. Attach the 6 claws to install the cover.


6. INSTALL REAR SEAT HEADREST ASSEMBLY
  1. Install the headrest.

← REASSEMBLY (from Aug 2013)DISPOSAL (from Aug 2013) →