2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Aug 2013

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.


1. REMOVE REAR SEAT HEADREST ASSEMBLY
  1. Remove the headrest.


2. REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER

B241072
  1. Using a moulding remover, detach the 6 claws.

  1. Detach the 2 guides and remove the cover.


3. REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER

B241074
  1. Using a moulding remover, detach the 6 claws.

  1. Detach the 2 guides and remove the cover.


4. REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER

  1. B240275
    Operate the reclining release handle to move the seat into the position shown in the illustration.

  1. B241076
    Using a moulding remover, detach the claw and remove the cover.


5. REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER

  1. B241077
    Using a moulding remover, detach the claw and remove the cover.


6. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

B240279
  1. Remove the 3 bolts, nut and seat.

    NOTICE:
    Be careful not to damage the vehicle body.

← COMPONENTS (from Aug 2013)DISASSEMBLY (from Aug 2013) →