INSTALLATION
Removal / installation · Vehicles built from Aug 2013
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
| 1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH |
Install the inner belt with the nut.

- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the rear seat adjuster.
Text in Illustration *a
Protruding Part
| 2. INSTALL REAR NO. 1 SEAT RECLINING COVER LH |
Attach the 2 hooks.
Move the cover in the direction of the arrow to attach the guide.

Attach the 2 claws.
Install the cover with the 2 screws.
| 3. INSTALL REAR NO. 1 SEAT ASSEMBLY RH |
Install the rear No. 1 seat assembly RH (Click here).
