2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT CLEARANCE WARNING INDICATOR ASSEMBLY

B362709E01
  1. Inspect the indicator operation.

    1. for A:

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 9 (BD)
      Battery negative (-) → Terminal 1 (OP)
      LED illuminates

      If the result is not as specified, replace the clearance warning indicator assembly.

    2. for B:

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 9 (BD)
      Battery negative (-) → Terminal 15 (BK)
      LED illuminates

      If the result is not as specified, replace the clearance warning indicator assembly.

    3. for C:

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 9 (BD)
      Battery negative (-) → Terminal 14 (RL)
      LED illuminates

      If the result is not as specified, replace the clearance warning indicator assembly.

    4. for D:

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 9 (BD)
      Battery negative (-) → Terminal 5 (RR)
      LED illuminates

      If the result is not as specified, replace the clearance warning indicator assembly.

  1. Inspect the illumination operation.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 11 (ILL+)
    Battery negative (-) → Terminal 8 (ILL-)
    LED illuminates

    If the result is not as specified, replace the clearance warning indicator assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Clearance Warning Indicator Assembly)

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →