REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY |
Detach the 4 clips.

Disconnect the connector and remove the integration control and panel assembly.
| 2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() ![]() |
Detach the 10 clips and remove the center instrument cluster finish panel.
Disconnect each connector.
| 3. REMOVE CLEARANCE WARNING INDICATOR ASSEMBLY |
![]() ![]() |
Detach the 4 claws and remove the clearance warning indicator assembly.


