2013-2015 Land Cruiser Prado · Service Manual Drivetrain

REPLACEMENT

Removal / installation · Vehicles built from Aug 2013


1. REMOVE MANUAL TRANSMISSION UNIT ASSEMBLY
  1. Remove the manual transmission unit (Click here).


2. REMOVE TRANSFER ASSEMBLY

  1. C233861E01
    for 1KD-FTV:
    Text in Illustration 
    *A
    for 1KD-FTV, RA61F
    *B
    for 1KD-FTV, A750F
    Remove the 8 bolts and 2 brackets.

  1. C235226
    except 1KD-FTV:
    Remove the 8 bolts and bracket.

  1. Remove the transfer from the transmission.


3. REMOVE TRANSFER ADAPTER OIL SEAL

  1. C215981E01
    Using SST, tap out the oil seal.
    SST
    09308-00010  


4. INSTALL TRANSFER ADAPTER OIL SEAL
  1. Coat the lip of a new oil seal with MP grease.

  1. C215980E01
    Using SST and a hammer, tap in the oil seal.
    SST
    09223-00010  

    Standard depth:
    45.0 to 46.0 mm (1.78 to 1.81 in.)

    NOTICE:
    Be careful not to damage the lip of the oil seal.


5. INSTALL TRANSFER ASSEMBLY
  1. for 1KD-FTV:
    Install the transfer assembly with the 8 bolts and 2 brackets.

    Torque:
    24 N*m{ 245 kgf*cm , 18 ft.*lbf }

    NOTICE:
    Take care not to damage the adaptor rear oil seal with the transfer input gear spline.

  1. except 1KD-FTV:
    Install the transfer assembly with the 8 bolts and bracket.

    Torque:
    24 N*m{ 245 kgf*cm , 18 ft.*lbf }

    NOTICE:
    Take care not to damage the adaptor rear oil seal with the transfer input gear spline.


6. INSTALL MANUAL TRANSMISSION UNIT ASSEMBLY
  1. Install the manual transmission unit (Click here).

← COMPONENTS (from Aug 2013)COMPONENTS (from Aug 2013) →