INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT COUNTER GEAR |
 |
- Using a micrometer, measure the outside diameter of the journal surface.
- Standard outside diameter:
- 25.984 to 26.000 mm (1.0230 to 1.0236 in.)
- Minimum outside diameter:
- 25.984 mm (1.0230 in.)
- If the outside diameter is less than the minimum, replace the counter gear.
| INSPECT COUNTER GEAR FRONT BEARING |
 |
- Check that the front bearing rotates smoothly.
- If the bearing does not rotate smoothly, replace the bearing.