REASSEMBLY
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL COUNTER GEAR FRONT BEARING |
Using SST and a press, install a new front bearing to the counter gear.

- SST
- 09515-10010
Select a snap ring that will allow minimal axial play.

- Standard clearance:
- 0.1 mm (0.00393 in.) or less
- Standard No. 2 Counter Gear Front Bearing Snap Ring:
Mark
Thickness
1
2.05 to 2.10 mm (0.0807 to 0.0827 in.)
2
2.10 to 2.15 mm (0.0827 to 0.0847 in.)
3
2.15 to 2.20 mm (0.0847 to 0.0866 in.)
4
2.20 to 2.25 mm (0.0866 to 0.0886 in.)
5
2.25 to 2.30 mm (0.0886 to 0.0906 in.)
6
2.30 to 2.35 mm (0.0906 to 0.0925 in.)
Using a snap ring expander, install the snap ring.

