2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.


1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
  1. Install the inner belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


2. INSTALL REAR SEATBACK ASSEMBLY LH

B240263E01
  1. Fold down the seatback, set the seatback positioning wire on the hinge, and then temporarily install the bolt to the hinge.

    Text in Illustration 
    *1
    Positioning Wire

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Restore the seatback to the upright position and temporarily install the seatback with the 2 bolts.

  1. Tighten the bolts in the order indicated in the illustration.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }


3. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH
  1. Attach the 4 claws and 5 clips to install the carpet.


4. INSTALL REAR SEATBACK COVER
  1. Attach the 4 claws to install the cover.

  1. Restore the seatback to the upright position and lock it.


5. INSTALL REAR SEAT HEADREST ASSEMBLY
  1. Install the rear seat headrest assembly (Click here).

  1. Return the seat cushion to its original position.

← REMOVAL (from Aug 2014)INSTALLATION (from Aug 2014) →