2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.


1. REMOVE REAR SEAT HEADREST ASSEMBLY

  1. B242816
    Pull the rear seat cushion band and release the lock and lift up the back of the seat cushion to rotate it forward.

  1. Remove the rear seat headrest assembly (Click here).


2. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH

B237977
  1. Using a clip remover, detach the 5 clips.

  1. Detach the 4 claws and remove the carpet.


3. REMOVE REAR SEATBACK ASSEMBLY LH

B237979
  1. Remove the 2 bolts that secure the seatback to the floor.

  1. Fold down the seatback, remove the bolt from the hinge, and then remove the seatback.

    NOTICE:
    Be careful not to damage the vehicle body.


4. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

B241735
  1. Remove the bolt and inner belt.

← REMOVAL (Aug 2013 – Jul 2014)INSTALLATION (Aug 2013 – Jul 2014) →