INSTALLATION
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL THEFT WARNING RADAR SENSOR |
Install the theft warning radar sensor with the 2 screws.
- HINT:
- Perform the same procedure on the other side.
Connect the 2 connectors
Attach the 4 claws to install the bezel.

- HINT:
- Perform the same procedure on the other side.
Attach the clamp to install the theft warning radar sensor.
Install the 2 screws.
Connect the connector.
Secure the wire harness of the theft warning radar sensor at the 4 locations with new tape.
| 2. INSTALL MAP LIGHT ASSEMBLY |
Connect the connector.
Attach the 4 clips to install the map light.
