2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT REAR SEAT CUSHION HEATER ASSEMBLY

B249707E02
  1. Check the rear seat cushion heater assembly.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      A-1 - B-1
      Seat cushion heater temperature 20°C (68°F)
      3.4 to 4.2 Ω
      A-4 - B-2
      A-1 - A-4
      A-2 - A-3
      8 to 12 kΩ

      If the result is not as specified, replace the rear seat cushion heater assembly.
      Text in Illustration 
      *1
      Connector A
      *2
      Connector B
      *a
      Component without harness connected
      (Rear Seat Cushion Heater Assembly)

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →