2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.


1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY

B248327E02
  1. Set the rear seat cushion heater assembly in place with the name stamp side facing the separate type rear seat cushion cover.

    Text in Illustration 
    *1
    Tack Pin
    *2
    Name Stamp

  1. Install the rear seat cushion heater assembly with 23 new tack pins.


2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER
  1. Set the separate type rear seat cushion cover in place.

  1. B237628E01
    Using hog ring pliers, install the separate type rear seat cushion cover to the separate type rear seat cushion pad with 14 new hog rings.
    Text in Illustration 
    *1
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the separate type rear seat cushion cover.
    2. Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seat cushion cover.


3. INSTALL REAR NO. 2 SEAT PROTECTOR
  1. Install the 2 rear No. 2 seat protectors to the separate type rear seat cushion pad.


4. INSTALL SEAT CUSHION COVER WITH PAD

  1. B237625
    Attach the hook.

  1. B237623
    Attach the hooks to install the seat cushion cover with pad.

  1. w/ Seat Heater System:

    1. B360133
      Pass the wire harness as shown in the illustration.

    2. B359313
      Connect the 2 rear seat heater connectors.


5. INSTALL REAR SEAT CUSHION MOULDING LH

B237620
  1. Move the rear seat cushion moulding LH in the direction of the arrow to attach the guide.

  1. Attach the 3 claws and clip to install the rear seat cushion moulding LH.


6. INSTALL CENTER SEAT HINGE COVER LH

B237618
  1. Attach the 2 guides and install the center seat hinge cover LH with the clip.


7. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH
  1. Install the reclining adjuster release handle LH with the 3 screws.


8. INSTALL REAR SEAT UPPER RECLINING COVER LH

B237786
  1. Attach the 3 claws to install the rear seat upper reclining cover LH.


9. INSTALL REAR NO. 1 SEAT ASSEMBLY LH
(Click here)
← INSPECTION (from Aug 2013)COMPONENTS (from Aug 2013) →