2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

C1AB6 Blind Spot Monitor Master Module

Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.
DTC Code
DTC Detection Condition
Trouble Area
C1AB6
The blind spot monitor sensor LH (master) detects an internal malfunction.
Blind spot monitor sensor LH

INSPECTION PROCEDURE

NOTICE:
When checking for DTCs, make sure that the blind spot monitor main switch assembly (multi-function switch) is on.


1. CHECK DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same DTC is output again (Click here).

    OK:
    No DTCs are output.



NG
REPLACE BLIND SPOT MONITOR SENSOR LH (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)


← C1AB5 Open in Outer Mirror Indicator(Slave) (from Aug 2014)C1AB6 Blind Spot Monitor Master Module (from Aug 2014) →