C1AB7 Blind Spot Monitor Slave Module
Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
This DTC is stored when the blind spot monitor sensor RH detects an internal malfunction.| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1AB7 |
The blind spot monitor sensor RH (slave) detects an internal malfunction. |
Blind spot monitor sensor RH |
INSPECTION PROCEDURE
- NOTICE:
- When checking for DTCs, make sure that the blind spot monitor main switch assembly (multi-function switch) is on.
| 1. CHECK DTC |
Clear the DTCs (Click here).
Recheck for DTCs and check if the same DTC is output again (Click here).
- OK:
- No DTCs are output.
|
|
||||
| OK | ||
| ||
