2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL OUTER MIRROR ACTUATOR ASSEMBLY LH
  1. Connect the connector.

  1. Install the cover and attach the 2 clamps.

  1. B293031
    Install the outer mirror actuator with the 3 screws.

    NOTICE:
    Install the actuator so that the wire harness is as shown in the illustration.


2. INSTALL OUTER MIRROR GLASS
(Click here)
← REMOVAL (from Aug 2013)COMPONENTS (from Aug 2013) →