REMOVAL
Removal / installation · Vehicles built from Aug 2013
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1.
REMOVE OUTER MIRROR GLASS
|
 |
Push the upper part of the mirror surface and tilt it.
Using a moulding remover, detach the 4 claws and separate the outer rear view mirror glass from the mirror body.
- HINT:
- Apply protective tape to the outer rear view mirror to prevent it from being damaged.
Text in Illustration
*1
|
Protective Tape
|
Disconnect the connectors and remove the mirror glass.
| 2.
REMOVE OUTER MIRROR ACTUATOR ASSEMBLY LH |
 |
- Remove the 3 screws.
- Disconnect the 2 clamps and open the cover.
- Disconnect the connector and remove the outer mirror actuator assembly LH.