2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL FRONT SEAT LAP INNER BELT SUB-ASSEMBLY RH
  1. Install the front seat lap inner belt sub-assembly RH with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Make sure that the cover of the front seat lap inner belt sub-assembly RH is not pinched.

← REMOVAL (from Aug 2013)COMPONENTS (from Aug 2013) →