2013-2015 Land Cruiser Prado · Service Manual
Vehicle Interior
Home
›
Vehicle Interior
› SEAT BELT › FRONT CENTER SEAT INNER BELT (for Bench Seat Type)
REMOVAL
Removal / installation
·
Vehicles built from Aug 2013
HINT:
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1. REMOVE FRONT SEAT LAP INNER BELT SUB-ASSEMBLY RH
Loosen the bolt and remove the front seat lap inner belt sub-assembly RH from the floor.
← COMPONENTS (from Aug 2013)
INSTALLATION (from Aug 2013) →