2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL POWER OUTLET SOCKET COVER NO.2
  1. Attach the 2 claws to install the power outlet socket cover.


2. INSTALL POWER OUTLET SOCKET ASSEMBLY
  1. Attach the 2 claws to install the power outlet socket.


3. INSTALL UPPER CONSOLE PANEL
  1. Connect the connector and attach the clamp.

  1. Attach the 2 clips to install the upper console panel.

  1. Install the 2 screws.


4. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
  1. w/o Seat Heater System:

    1. Connect the connector.

    2. Attach the 5 clips to install the front console upper panel garnish.

  1. w/o CRAWL:

    1. Connect each connector.

    2. Attach the 5 clips to install the front console upper panel garnish.

  1. w/ CRAWL:

    1. Attach the 5 clips to install the front console upper panel garnish.


5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
  1. Attach the 4 clips to install the instrument panel finish panel end LH.


6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
  1. Attach the 4 clips to install the instrument panel finish panel end RH.


7. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
  1. Connect the connector.

  1. Attach the 4 clips to install the integration control and panel assembly.

← REMOVAL (from Aug 2013)COMPONENTS (from Aug 2013) →