2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

  1. E283079
    Detach the 4 clips.

  1. Disconnect the connector and remove the integration control and panel assembly.


2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

B356216
  1. Detach the 4 clips and remove the instrument panel finish panel end LH.


3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

B356217
  1. Detach the 4 clips and remove the instrument panel finish panel end RH.


4. REMOVE FRONT CONSOLE UPPER PANEL GARNISH

  1. w/o Seat Heater System:

    1. B357641E01
      Put protective tape around the front console upper panel garnish.
      Text in Illustration 
      *1
      Protective Tape

    2. Detach the 5 clips and remove the front console upper panel garnish.

    3. Disconnect the connector.

  1. w/o CRAWL:

    1. B357639E01
      Put protective tape around the front console upper panel garnish.
      Text in Illustration 
      *1
      Protective Tape

    2. Detach the 5 clips and remove the front console upper panel garnish.

    3. Disconnect each connector.

  1. w/ CRAWL:

    1. B357640E01
      Put protective tape around the front console upper panel garnish.
      Text in Illustration 
      *1
      Protective Tape

    2. Detach the 5 clips and remove the front console upper panel garnish.


5. REMOVE UPPER CONSOLE PANEL

B295758
  1. Remove the 2 screws.

  1. Detach the 2 clips and remove the upper console panel.

  1. B363430
    Disconnect the connector and detach the clamp.


6. REMOVE POWER OUTLET SOCKET ASSEMBLY
  1. Using a screwdriver, depress the claw labeled A from the front of the upper console panel.

    HINT:
    Tape the screwdriver tip before use.

  1. While depressing the claw labeled A, detach the claw labeled B from the back of the upper console panel, and then push out the power outlet socket in the direction of the arrow in the illustration to remove it.

    B295762E01

    Text in Illustration 
    *1
    Protective Tape
    *2
    Claw A
    *3
    Claw B
    -
    -
    *a
    Front of Upper Console Panel
    *b
    Back of Upper Console Panel


7. REMOVE POWER OUTLET SOCKET COVER NO.2

B295763
  1. Detach the 2 claws and remove the power outlet socket cover.

← COMPONENTS (from Aug 2013)INSTALLATION (from Aug 2013) →